-->
Merrill Mfg.
1" Stainless Steel Flow Control Valve for 6.0 Gallon Per Minute, Female Pipe Thread to Female Pipe Thread, For Energy Conservation and Water Management
$53.25
Merrill FRGC flow control valves are precision engineered to maintain a consistent water flow rate across a wide range of pressures using a self-adjusting rubber orifice. Each valve body is manufactured from corrosion-resistant stainless steel and ideal for potable water use in systems up to 125 PSI and 180 degrees F. To maintain constant flow, a threshold pressure of 15-25 PSI must be maintained. These valves are directional and must be installed with arrow pointing in direction of water flow. Recommended for potable water only.
- stinaess steel valve body with rubber self-adjusting orifice
- 1" Female Iron Pipe (FIP) x 1" Female Iron Pipe (FIP)
- connects to any supplied male iron pipe threaded fitting
- connection type: FPT x FPT
- material: brass/stainless steel
- inlet: 1 inch
- outlet: 1 inch
- flow rate: 6.0 GPM
- threshold pressure: 15-25 PSI
- point at which orifice changes to maintain flow rate
- max. system pressure: 125 PSI
- max. water temperature: 180°F
- Mfg. PN: FRGX1060
- comparable to Dole Flow Regulator
- directional flow
- for energy conservation and water management
- ideal for open-loop geothermal, irrigation, industrial and OEM systems
- manufactured by Merrill Manufacturing
|
Mfg. PN |
Material |
Connection Type |
Inlet | Outlet | Flow Rate | Threshold Pressure | Max. System Pressure | Max. Water Temp. |
| FRGX1060 | brass/stainless steel | FPT x FPT | 1" | 1" | 6.0 GPM | 15-25 PSI | 125 PSI | 180 deg F |
